Please refer the 3 steps below when placing order
Choose Materials
- Total files: --
- Total volume: --
3D Preview
ONLINE 3D PRINTING - MATERIAL SELECTION
| SLA | Standard Resin (similar to plastic) |  |
STRENGTH Strong enough for assembly check FINISH Decently polished Painting with different colors is available WORKING TEMPERATURE up to 46ºC. |
Opaque white | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Opaque white
Lead Time:
24 hours to 72 hours
Material:
Standard Resin (similar to plastic)
Material Properties:
STRENGTH Strong enough for assembly check
FINISH Decently polished Painting with different colors is available
WORKING TEMPERATURE up to 46ºC.
FINISH Decently polished Painting with different colors is available
WORKING TEMPERATURE up to 46ºC.
| US$ 0.00 |
| MJF | Black PA12 |  |
STRENGTH Tough Flexible, good for snap fit, and thread taping design FINISH Rough, with granular touch WORKING TEMPERATURE High deformation temperature up to 145ºC. |
Black | 3 days to 7 days | US$ 0.00 |
Process:
MJF
Color:
Black
Lead Time:
3 days to 7 days
Material:
Black PA12
Material Properties:
STRENGTH Tough Flexible, good for snap fit, and thread taping design
FINISH Rough, with granular touch
WORKING TEMPERATURE High deformation temperature up to 145ºC.
FINISH Rough, with granular touch
WORKING TEMPERATURE High deformation temperature up to 145ºC.
| US$ 0.00 |
| SLA | Tough Resin (similar to plastic) |  |
STRENGTH Super toughness, high hardness strength FINISH No polishing(as 3D printed) WORKING TEMPERATURE up to 70ºC. |
Light Green | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Light Green
Lead Time:
24 hours to 72 hours
Material:
Tough Resin (similar to plastic)
Material Properties:
STRENGTH Super toughness, high hardness strength
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 70ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 70ºC.
| US$ 0.00 |
| SLA | High Precision Resin (lost wax casting for jewelry) |  |
STRENGTH High precision,smooth performance,good detail and clear outline FINISH The finest finish. Extremely smooth and rich of the details. An ideal material for jewelry WORKING TEMPERATURE High deformation temperature up to 64ºC. |
Peach | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Peach
Lead Time:
24 hours to 72 hours
Material Properties:
STRENGTH High precision,smooth performance,good detail and clear outline
FINISH The finest finish. Extremely smooth and rich of the details. An ideal material for jewelry
WORKING TEMPERATURE High deformation temperature up to 64ºC.
FINISH The finest finish. Extremely smooth and rich of the details. An ideal material for jewelry
WORKING TEMPERATURE High deformation temperature up to 64ºC.
| US$ 0.00 |
| SLA | High Temperature Resistant Resin (similar to plastic) |  |
STRENGTH Resistant to heat up to 130°C,extremely precise accuracy for small details FINISH No polishing(as 3D printed) WORKING TEMPERATURE up to 130ºC. |
Grey | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Grey
Lead Time:
24 hours to 72 hours
Material Properties:
STRENGTH Resistant to heat up to 130°C,extremely precise accuracy for small details
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 130ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 130ºC.
| US$ 0.00 |
| SLA | Transparent Resin (similar to plastic) |  |
STRENGTH Optically clear,excellent temperature resistance FINISH Polishing WORKING TEMPERATURE up to 80ºC. |
Optically clear | 3 days to 7 days | US$ 0.00 |
Process:
SLA
Color:
Optically clear
Lead Time:
3 days to 7 days
Material:
Transparent Resin (similar to plastic)
Material Properties:
STRENGTH Optically clear,excellent temperature resistance
FINISH Polishing
WORKING TEMPERATURE up to 80ºC.
FINISH Polishing
WORKING TEMPERATURE up to 80ºC.
| US$ 0.00 |
| SLA | Translucent Resin (similar to plastic) |  |
STRENGTH Low viscosity,easy to clean,high precision,excellent print details,high toughness FINISH No polishing(as 3D printed) WORKING TEMPERATURE High deformation temperature up to 70ºC. |
Translucent | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Translucent
Lead Time:
24 hours to 72 hours
Material:
Translucent Resin (similar to plastic)
Material Properties:
STRENGTH Low viscosity,easy to clean,high precision,excellent print details,high toughness
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 70ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 70ºC.
| US$ 0.00 |
| SLA | Flexible Resin (similar to silicone / rubber) |  |
STRENGTH Excellent excellent flexibility and toughness, no odor, low viscosity, easy to clean FINISH No polishing(as 3D printed) WORKING TEMPERATURE up to 55ºC. |
Light Yellow | 24 hours to 72 hours | US$ 0.00 |
Process:
SLA
Color:
Light Yellow
Lead Time:
24 hours to 72 hours
Material:
Flexible Resin (similar to silicone / rubber)
Material Properties:
STRENGTH Excellent excellent flexibility and toughness, no odor, low viscosity, easy to clean
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 55ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE up to 55ºC.
| US$ 0.00 |
| LCD | Traditional Resin |  |
STRENGTH High rigid and toughness FINISH No polishing(as 3D printed). |
White | 24 hours to 72 hours | US$ 0.00 |
Process:
LCD
Color:
White
Lead Time:
24 hours to 72 hours
Material:
Traditional Resin
Material Properties:
STRENGTH High rigid and toughness
FINISH No polishing(as 3D printed).
FINISH No polishing(as 3D printed).
| US$ 0.00 |
| FDM | ABS Filament |  |
STRENGTH Extremely strong and impact resistant,high gloss,good chemical resistance FINISH Decently polished,plating process,Painting with different colors is available WORKING TEMPERATURE Vicat softening temperature up to 108ºC. |
White | 24 hours to 72 hours | US$ 0.00 |
Process:
FDM
Color:
White
Lead Time:
24 hours to 72 hours
Material:
ABS Filament
Material Properties:
STRENGTH Extremely strong and impact resistant,high gloss,good chemical resistance
FINISH Decently polished,plating process,Painting with different colors is available
WORKING TEMPERATURE Vicat softening temperature up to 108ºC.
FINISH Decently polished,plating process,Painting with different colors is available
WORKING TEMPERATURE Vicat softening temperature up to 108ºC.
| US$ 0.00 |
| FDM | PEEK Filament |  |
STRENGTHHigh strength, high fracture toughness and excellent stability FINISH Decently polished WORKING TEMPERATURE Maintain high wear resistance under 250°C. |
Brown | 3 days to 7 days | US$ 0.00 |
Process:
FDM
Color:
Brown
Lead Time:
3 days to 7 days
Material:
PEEK Filament
Material Properties:
STRENGTHHigh strength, high fracture toughness and excellent stability
FINISH Decently polished
WORKING TEMPERATURE Maintain high wear resistance under 250°C.
FINISH Decently polished
WORKING TEMPERATURE Maintain high wear resistance under 250°C.
| US$ 0.00 |
| SLS | PA12 |  |
STRENGTH Excellent mechanical properties and high elongation at break Low water absorption FINISH Sand blasting WORKING TEMPERATURE High deformation temperature up to 83.5ºC. |
White | 3 days to 7 days | US$ 0.00 |
Process:
SLS
Color:
White
Lead Time:
3 days to 7 days
Material:
PA12
Material Properties:
STRENGTH Excellent mechanical properties and high elongation at break Low water absorption
FINISH Sand blasting
WORKING TEMPERATURE High deformation temperature up to 83.5ºC.
FINISH Sand blasting
WORKING TEMPERATURE High deformation temperature up to 83.5ºC.
| US$ 0.00 |
| SLS | PA12-GF |  |
STRENGTH High stiffness, mechanical wear-resistance, and dimensional accuracy FINISH Sand blasting WORKING TEMPERATURE High deformation temperature up to 152ºC. |
Light Grey | 3 days to 7 days | US$ 0.00 |
Process:
SLS
Color:
Light Grey
Lead Time:
3 days to 7 days
Material:
PA12-GF
Material Properties:
STRENGTH High stiffness, mechanical wear-resistance, and dimensional accuracy
FINISH Sand blasting
WORKING TEMPERATURE High deformation temperature up to 152ºC.
FINISH Sand blasting
WORKING TEMPERATURE High deformation temperature up to 152ºC.
| US$ 0.00 |
| SLS | TPU (Similar to Rubber) |  |
STRENGTH Elastomeric material with 70 shore A Elongation at break > 300% and high resolution FINISH As 3d printing WORKING TEMPERATURE Melting temperature 150ºC. |
White | 3 days to 7 days | US$ 0.00 |
Process:
SLS
Color:
White
Lead Time:
3 days to 7 days
Material:
TPU (Similar to Rubber)
Material Properties:
STRENGTH Elastomeric material with 70 shore A Elongation at break > 300% and high resolution
FINISH As 3d printing
WORKING TEMPERATURE Melting temperature 150ºC.
FINISH As 3d printing
WORKING TEMPERATURE Melting temperature 150ºC.
| US$ 0.00 |
| DMLS | Aluminium Alloy |  |
STRENGTH good casting properties,good strength and hardness,high dynamic properties. |
Grey | 3 days to 7 days | US$ 0.00 |
Process:
DMLS
Color:
Grey
Lead Time:
3 days to 7 days
Material:
Aluminium Alloy
Material Properties:
STRENGTH good casting properties,good strength and hardness,high dynamic properties.
| US$ 0.00 |
| DMLS | Stainless Steel |  |
STRENGTH excellent corrosion resistance,high ductility,meets the requirements of the ASTM F138 norm. |
Grey | 3 days to 7 days | US$ 0.00 |
Process:
DMLS
Color:
Grey
Lead Time:
3 days to 7 days
Material:
Stainless Steel
Material Properties:
STRENGTH excellent corrosion resistance,high ductility,meets the requirements of the ASTM F138 norm.
| US$ 0.00 |
| DMLS | Maraging Steel |  |
STRENGTH easily machinable,age hardenable up to approx 54 HRC,good thermal conductivity. |
Grey | 3 days to 7 days | US$ 0.00 |
Process:
DMLS
Color:
Grey
Lead Time:
3 days to 7 days
Material:
Maraging Steel
Material Properties:
STRENGTH easily machinable,age hardenable up to approx 54 HRC,good thermal conductivity.
| US$ 0.00 |
| DMLS | Titanium Alloy |  |
STRENGTH Light weight with high specific strength (strength per density),Corrosion resistance,commonly used in biomedical applications,Very good bioadhesion. |
Grey | 3 days to 7 days | US$ 0.00 |
Process:
DMLS
Color:
Grey
Lead Time:
3 days to 7 days
Material:
Titanium Alloy
Material Properties:
STRENGTH Light weight with high specific strength (strength per density),Corrosion resistance,commonly used in biomedical applications,Very good bioadhesion.
| US$ 0.00 |
| DMLS | CoCrMo Alloy |  |
STRENGTH high strength, temperature and corrosion resistance,mechanical properties improve with increased temperature up to 500-600 °C |
Grey | 3 days to 7 days | US$ 0.00 |
Process:
DMLS
Color:
Grey
Lead Time:
3 days to 7 days
Material:
CoCrMo Alloy
Material Properties:
STRENGTH high strength, temperature and corrosion resistance,mechanical properties improve with increased temperature up to 500-600 °C
| US$ 0.00 |
| FDM | ULTEM™ 1010 Filament |  |
STRENGTHhighest heat resistance, chemical resistance and tensile strength FINISH Decently polished WORKING TEMPERATURE High deformation temperature up to 216ºC. |
Brown | 3 days to 7 days | US$ 0.00 |
Process:
FDM
Color:
Brown
Lead Time:
3 days to 7 days
Material:
ULTEM™ 1010 Filament
Material Properties:
STRENGTHhighest heat resistance, chemical resistance and tensile strength
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 216ºC.
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 216ºC.
| US$ 0.00 |
| FDM | ULTEM® 9085 Filament |  |
STRENGTHhigh strength-to-weight ratio,excellent heat resistance and high impact strength FINISH Decently polished WORKING TEMPERATURE High deformation temperature up to 177ºC. |
Brown | 3 days to 7days | US$ 0.00 |
Process:
FDM
Color:
Brown
Lead Time:
3 days to 7days
Material:
ULTEM® 9085 Filament
Material Properties:
STRENGTHhigh strength-to-weight ratio,excellent heat resistance and high impact strength
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 177ºC.
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 177ºC.
| US$ 0.00 |
| FDM | PPSF/PPSU Filament |  |
STRENGTHhigh temperature and chemical resistance,strong mechanical properties FINISH Decently polished WORKING TEMPERATURE High deformation temperature up to 189ºC. |
Brown | 3 days to 7 days | US$ 0.00 |
Process:
FDM
Color:
Brown
Lead Time:
3 days to 7 days
Material:
PPSF/PPSU Filament
Material Properties:
STRENGTHhigh temperature and chemical resistance,strong mechanical properties
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 189ºC.
FINISH Decently polished
WORKING TEMPERATURE High deformation temperature up to 189ºC.
| US$ 0.00 |
| FDM | ABS-M30 Filament |  |
STRENGTHgreater tensile,impact and flexural strength,significantly stronger layer bonding,smoother and have better feature detail FINISH Decently polished,plating process WORKING TEMPERATURE High deformation temperature up to 96ºC. |
Black | 24 hours to 72 hours | US$ 0.00 |
Process:
FDM
Color:
Black
Lead Time:
24 hours to 72 hours
Material:
ABS-M30 Filament
Material Properties:
STRENGTHgreater tensile,impact and flexural strength,significantly stronger layer bonding,smoother and have better feature detail
FINISH Decently polished,plating process
WORKING TEMPERATURE High deformation temperature up to 96ºC.
FINISH Decently polished,plating process
WORKING TEMPERATURE High deformation temperature up to 96ºC.
| US$ 0.00 |
| FDM | ABS ESD7 Filament |  |
STRENGTH Static-Dissipative,Ideal for electronic products FINISH No polishing(as 3D printed) WORKING TEMPERATURE High deformation temperature up to 96ºC. |
Black | 3-7 days | US$ 0.00 |
Process:
FDM
Color:
Black
Lead Time:
3-7 days
Material:
ABS ESD7 Filament
Material Properties:
STRENGTH Static-Dissipative,Ideal for electronic products
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 96ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 96ºC.
| US$ 0.00 |
| FDM | Long Carbon Fiber Reinforced Filament |  |
STRENGTHHigh stiffness and strength ,excellent heat resistance,surface finish,chemical resistance FINISH No polishing(as 3D printed) WORKING TEMPERATURE High deformation temperature up to 105ºC. |
Black | 3-7 days | US$ 0.00 |
Process:
FDM
Color:
Black
Lead Time:
3-7 days
Material:
Long Carbon Fiber Reinforced Filament
Material Properties:
STRENGTHHigh stiffness and strength ,excellent heat resistance,surface finish,chemical resistance
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 105ºC.
FINISH No polishing(as 3D printed)
WORKING TEMPERATURE High deformation temperature up to 105ºC.
| US$ 0.00 |
Subscribe
No, thanks
© Copyright 2009 - 2020 | All Rights Reserved
Both my recent orders arrived in the last few days.The Flying Spaghetti Montster is amazing. I only now appreciate how delicate it is and some of the issues you had in printing it. The print was very well packed and it took quite a while to blow away the shredded paper. Many thankyous.
Michael
The package arrived today and everything in perfect. Great job with the models, and the packing was excellent. Everything arrived safely. I am very happy with your high level of customer service and quality. I will definitely be back with my next order. Thank you so much.
Keri
I'll definitely come to you when/if I need more resin prints in future!I will also highly recommend your company to a dice-making group I am part of (with 10K+ members) for excellent quality products and customer service, so hopefully you'll get more orders!
Bryar R