High Temperature Resistant Resin (similar to plastic) | Lava | Online 3D Printing Prototype, Mass Production Instant Quote and Order Service

Introduction

High Temperature Resistant Resin (similar to plastic)

Somos® ProtoTherm 12120 stereolithography material(similar to plastic) is the perfect solution for applications requiring resistance to heat and humidity. Somos® ProtoTherm 12120 excels at producing highly detailed, extremely accurate parts. The material is dimensionally stable when exposed to heat and humidity making it a good candidate for high temperature fluid flow analysis, functional prototypes, and limited run, non-critical end-use parts such as wiring harnesses and support connectors in electronic devices.

Key Benefits
Extremely precise accuracy for small details
Resistant to heat up to 130°C
Stable in high humidity environments

Technical Specifications

Appearance Grey
Printing Process Stereolithography (SLA)
Maximum part dimensions 1400 x 700 x 500 mm (551.1 x 275.5 x 196.8 in)
Layer thickness 0.1 -0.25 mm
Standard accuracy L<100 mm: ±0.2mm L≥100 mm: ±0.2% x L
Minimum wall thickness 0.6 mm
Minimum pore diameter 1.0 mm
Heat deflection temperature (0.46 MPa) 66.8 °C
Hardness (Shore D) 86
Tensile strength 64 MPa
Tensile Modulus 2846 MPa
Flexural Strength 112 MPa
Flexural Modulus 2732 MPa
Impact Strength 19 J/M
100%