ULTEM™ 1010 Filament | Lava | Online 3D Printing Prototype, Mass Production Instant Quote and Order Service

Introduction

ULTEM™ 1010 Filament

This ultra-performance 3D printing filament using ULTEM™ 1010 PEI (polyether imide) resin. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Filaments made using ULTEM™ 1010 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.

Key Benefits
High thermal properties: (Tg) of 217°C
Inherent flame resistance
Long-term hydrolytic stability
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
Exceptional strength and modulus, even at elevated temperatures
Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies

Technical Specifications

Appearance Natural
Printing Process Fused Deposition Melting
Maximum part dimensions 450*450*600mm
Layer thickness 0.05~0.3mm
Position Accuracy X/Y: 18.75um Z: 1.56um
Maximum Nozzle Temperature 400 ℃
Maximum Build Plate Temperature 160 ℃
Tensile Strength 64Mpa
Tensile Modulus 2770Mpa
Heat Deflection (HDT) @ 66 psi, 0.125” 216°C
100%