Online 3d Printing Services | 3d print service - Lava PETG Filament | Lava | Online 3D Printing Prototype, Mass Production Instant Quote and Order Service

Introduction

PETG Filament

PETG filament is an extra tough 3D print material. This is an extreme high strength filament and can achieve very sturdy and strong prints. It has very low shrinkage, making this perfect for larger flat surfaces. PETG is a perfect alternative to ABS and PLA, offering higher strength, lower shrinkage, and a smoother finish.

Key Benefits
Odorless;little shrinkage rate;
Hydrophobicity(Will not absorb water and as such clog the extruders);
Outstanding toughness and high impact strength;
Good liquidity(flows smoothly);
High mehanical strength and excellent flexibility;

Technical Specifications

Appearance Black
Printing Process Fused Deposition Melting
Maximum part dimensions 300*300*400 (X/Y/Z) (mm)
Layer thickness 0.05~0.4mm
Maximum Nozzle Diameter 0.4mm (optional 0.2/0.4/0.6/0.8/1.0mm))
Maximum Nozzle Temperature 300 ℃
Maximum Build Plate Temperature 130 ℃
Tensile strength 49 Mpa
Flexural Strength 68 Mpa
Impact Strength 7.5 kJ/m2
Elongation at Break 228%
100%